Buy Two Way Radios Buy Two Way Radios

Member of the Federation of Communication Services

Steelmate Reversing Sensors and Alarms

PTS400EX-F
Front Sensors


Steelmate PTS400EX-F Parking Sensors4 Front Sensors With Buzzer. The system can be programmed to ignore protrusions such as nudge bars and tow bars. Can be used as a 2 Sensor system if required.

£185.00 +VAT installed*
PTS400EX
Rear Sensors


Steelmate PTS400EX Rear Parking Sensors 4-Sensor Rear Only Kit With Buzzer. The system can be programmed to ignore tow bars or spare wheels.





£155.00+VAT installed*
PTS800EX
Front & Rear Sensors


Steelmate PTS800EX Front and Rear Parking Sensors 8-Sensor Front and rear kit with buzzers. The system can be programmed to ignore protrusions such as nudge bars, tow bars and spare wheels.


£295.00 +VAT installed*
PTS800MM
F & R with Displays


Steelmate PTS800MM Parking Sensors with displays 8-Sensor Front and rear kit with two displays and buzzers. The system can be programmed to ignore protrusions such as nudge bars, tow bars and spare wheels.

£335.00 +VAT installed*

CAN Bus Speed Dependent Interface

Steelmate Can Bus Dependent Interface Provides 2 Outputs, specifically designed for the control of our front parking systems from the vehicle's CAN Bus.

A +12v controlled output is generated by the interface as soon as the vehicle's ignition is switched on, and switched off while the vehicle speed is above (approximately) 6 MPH. With ignition sense.

£POA +VAT installed*




Valeo Keeper Range (installed)

beep&park®/keeper™
4 front & 4 rear parking sensors with beep alert & display, plus anti-bump alert.

beep&park®/keeper™
is a front and rear parking assistance system with an anti-bump alert to protect your vehicle against the all too often clumsy parking manoeuvres of other motorists in a hurry.

When parking, the sensors detect all obstacles at the front and rear of the vehicle and indicate their distance from the bumper. The system features audible and visual warnings.

You can leave your parked vehicle without worry, thanks to the anti-bump functionality. The system detects vehicles that come too close to your car and gives off visual and audible signals to encourage drivers to pay extra attention when manoeuvring. The warnings give the impression that the owner of the parked vehicle is nearby and has opened the vehicle using a remote control.

Valeo Beep & Park Keeper Reversing Sensors

Safety
- Reduces risks of collision and associated high repair costs.
- Prevents impacts, material damages and injury.
- Protects your vehicle from other vehicles coming too close, thanks to a very effective deterrent.

Comfort
- Quicker and easier parking manoeuvres.
- Peace of mind: you can leave your vehicle without worrying, the system looks after your car while you are away.
- Equips your vehicle with a totally innovative solution.


£309.00

beep&park/vision™
Rear parking assistance, 4 sensors, camera and monitor
Valeo Beep & Park Keeper Parking Sensors

beep&park®/vision™ offers a double combination to makes your parking manoeuvres much easier. The 4 reverse parking sensors detect obstacles at the rear of the vehicle and guide you through the reversing manoeuvre by indicating the presence and distance of obstacles, even if they are not visible. The dash-mounted screen provides images of the zone immediately behind the car.

All obstacles are detected and displayed on the screen, facilitating the parking manoeuvre.

£285.00

park/vision™
Rear view camera and monitor
Valeo Beep & Park Keeper Parking Sensors

park/vision™ may be installed:

- If your vehicle is already fitted with a rear detection system and you wish to add the camera function for greater comfort and safety when manoeuvring.

- If you cannot install a rear detection system on your vehicle (for example some 4WD models), as park/vision™ can be installed on all types of vehicle.

- If you only need an image function, and not an installation of a full rear detection system, choose park/vision™.

£255.00

(All prices include standard on-site installation but exclude VAT. Please add £20 if colour matching is required for bumper sensors. Call 0191 5172889 to order)

-